General Admission: 600
1 x Midas M32 32-input 25-busDigital mixing console
10 x Meyer MILO: High-PowerCurvilinear Array Loudspeakers (5 per side)
6 x Adamson SX subwoofer enclosures (3 per side)
2 x Yorkville U15P Powered loudspeakers (1 per side)
1 x Galileo 616 Primary ArrayProcessor for MILO system
32 XLR channels from stage split panel to mix position
12 XLR Returns from mix position to stage panel
FOH booth is approximately 35’ from the stage against the House-Right wall
FOH booth is roughly 8’ by 6’ with room for external racks and 5’ of table space. (If house console is removed)
Touring FOH consoles can be set up in the centre of the room. However, our house snake extends only to our fixed FOH booth. So touring consoles must include their own snake or Cat5e network cable and digital stage box.
Unless specified otherwise in advance, we mix Monitors from our M32 at FOH. In addition they have:
1 x BEHRINGER X32 32-input Digital mixing console
- This console is Positioned inMonitor world (SR wing)
- This console has 32 inputs and can provide up to 16 mixes.
- If this console is to be used aHouse MONITOR tech needs to be present.
Has two complete monitor systems in-house. Depending on the type of event house techs will determine which system is to be used.
WEDGES: 8 x Electro-Voice MFX multi-function monitors
AMPLIFIERS: 4 x Dynacord L SeriesFIR-Drive Power Amplifiers
DRUM SUB: 1 X Drum Fill YorkvilleLS800P sub
WEDGES: 6 x Yorkville TX2M bi-amped monitors:
AMPLIFIERS: 3 x Yorkville AP800(powering LF wedge drivers)
AMPLIFIERS: 3 x Crest VS450(powering 2” HF wedge drivers)
DRUM SUB: 1 x Drum Fill Yorkville LS800P sub
PROCESSING: 3 ULTRADRIVE PRODCX2496 processors
1 x 16 channel XLR 25’ snake
1 x 16 channel XLR 100’ snake
1 x 8 channel XLR 50’ stage flea
1 x 6 channel XLR 50’ stage flea
40 XLR cables (50’ 25’ and 10’)
- All FOH system power is drawn from 10 dedicated 20A circuits
- All MONITOR amplifier power is drawn from 4 dedicated 20A circuits
- All Stage Sound/backline power is drawn from8 dedicated 20A circuits
In addition to Microphone package, venue does carry an assortment of mic stands (short, straight & boom),clips and drum mounts.
9 x Shure SM58
3 x Shure Beta58
8 x Shure SM57
2 x Shure Beta52
2 x Shure Beta91
2 x Shure SM81
2 Sennheiser e906
5 x Sennheiser e604
2 x AKG D112
2 x Audio Technica MB4000C – Passive DI boxes
5 x Yorkville YDI-1P PassiveDirect Box
3 x Radial ProDI Passive DirectBox
1 x Radial ProD2 Stereo PassiveDirect Box
1 x Radial Stereo PC Direct Box
1 x Art dual 2 ch. Passive DirectBox
The Rickshaw is equipped with an assortment of stage lighting. Fixtures can be adjusted and added to best fit the specific requirements of each production.
Two Projectors
4 x Torolight RGBW LED zoom moving head fixtures
4 x MICROH RGB LED BAR fixtures
2 x 1000w PAR 64 fixtures on baseplates
1 x Ultratec Radiance Haze
30’ x 10” triangular truss. Truss 1 is flown evenly dispersed upon two (2) half‐ton chain hoists whose rigging points fall approximately 25’ forward of the stage(directly above the dance floor). When in operation, this truss hangs 30’ above the floor and it can be lowered for adjustment to a minimum height of 5’ above the floor. Unless otherwise advanced, Truss 1 is equipped with: four (4) x 750w LEKO Fixtures, and five (5) x High End Systems Trackspots.
20’ x 10” triangular truss. Truss 2 is flown centered Downstage. It is flown evenly dispersed upon two (2) half-ton chain hoists whose rigging points fall about 2’ upstage of the front of the stage. When in operation the downstage lighting hangs 20’ above stage level and can be lowered for adjustment to a minimum height of 5’ feet above stage level. Unless otherwise advanced, Truss 2 is equipped with: four (4) x MICROH RGB LED PAR 64 fixtures, eight (8) x 500W and 1000W PAR 64 fixtures, eight (8) x PAR 56 fixtures in quad ‘mole’ configuration, and one (1) x Projector.
35’ x 10” Triangular truss Truss 3 is flown Upstage. It is flown evenly dispersed on three (3) Half ton chain hoists, whose rigging points fall in line with the rear of the stage. When in operation the upstage lighting hangs 20’ above stage level and can be lowered for adjustment to a minimum height of 5’ feet above stage level. Unless otherwise advanced, Truss 3 is equipped with: six (6) x Torolight RGBW LED zoom moving head fixtures, seven (7) x High End Systems Technobeam moving fixtures, three (3) x 1000w ACL Racks, and six (6) x 500w PAR 64 fixtures.
1 x 24 channel Unison Dimming Control Module (hardwired)
1 x Chauvet Pro D6 dimmer
Extra distribution panels are allocated to the light show in the event that additional lighting is required, Specifically in the case of intelligent fixtures and moving heads being carried by touring artists.
6 x 20A quad distribution panels
4 x 20A twist‐lock services
Data for all conventional dimmable fixtures and intelligent fixtures is run from via 5 pin or 3 pin DMX cable.
1 x PC running QLC+ software with MPC40 midi control surface or 1 x Jands Echelon (HOG 1000) Console.
2 x Custom Screen 12’ W x 8’ H (Flown on either side of the stage)
2 x Sanyo PLC-XF60A Projectors (aimed at our two flown custom screens)
1 x Custom cinema screen (behind retractable black curtains upstage)
1 x Epson Home Cinema 1040 Projector (aimed at cinema screen)
See below for comprehensive technical specifications.